EREM Teknoloji
safe and experienced
Istanbul, Turkey
Freelancer
-->
Real-Time / Embedded / DSP
ABOUT
I've done it before 4 separate R & D project work.
I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
Power electronics, knowledge, communication and energy issues, and I'm experienced. I realized it was my application on renewable energy sources.
I produce hydrogen batteries are dry type.
I also provides control by making PMG engine processor.
I produced generator device for use in wind turbines.
I produce electricity generating hydrogen fuel cells and microbial cells.
I can take control motors and stepper motors and servo motors as robot control, I made about them.
I use as a professional PCB programs smoothly.I'm experienced in the appropriate PCB circuit design for EMI and EMC characteristics.
UML software I've used before. I can use the lab equipment.
I did part the responsibility of the multinational companies for the last 23 years. I also worked for 10 years so special. Ad-mentioned issues and I think I am eligible for benefits you'd Right wellbeing.
I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
Power electronics, knowledge, communication and energy issues, and I'm experienced. I realized it was my application on renewable energy sources.
I produce hydrogen batteries are dry type.
I also provides control by making PMG engine processor.
I produced generator device for use in wind turbines.
I produce electricity generating hydrogen fuel cells and microbial cells.
I can take control motors and stepper motors and servo motors as robot control, I made about them.
I use as a professional PCB programs smoothly.I'm experienced in the appropriate PCB circuit design for EMI and EMC characteristics.
UML software I've used before. I can use the lab equipment.
I did part the responsibility of the multinational companies for the last 23 years. I also worked for 10 years so special. Ad-mentioned issues and I think I am eligible for benefits you'd Right wellbeing.
LANGUAGES
Turkish
Full professional proficiency
English
Elementary proficiency
SKILL DETAILS
Engineering
116 ₪
/ hr
Communications Engineering
can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
Software Engineering
Technology
87 ₪
/ hr
Real-Time / Embedded / DSP
I've done it before 4 separate R & D project work.
I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
Power electronics, knowledge, communication and energy issues, and I'm experienced. I realized it was my application on renewable energy sources.
I produce hydrogen batteries are dry type.
I also provides control by making PMG engine processor.
I produced generator device for use in wind turbines.
I produce electricity generating hydrogen fuel cells and microbial cells.
I can take control motors and stepper motors and servo motors as robot control, I made about them.
I use as a professional PCB programs smoothly.I'm experienced in the appropriate PCB circuit design for EMI and EMC characteristics.
I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
Power electronics, knowledge, communication and energy issues, and I'm experienced. I realized it was my application on renewable energy sources.
I produce hydrogen batteries are dry type.
I also provides control by making PMG engine processor.
I produced generator device for use in wind turbines.
I produce electricity generating hydrogen fuel cells and microbial cells.
I can take control motors and stepper motors and servo motors as robot control, I made about them.
I use as a professional PCB programs smoothly.I'm experienced in the appropriate PCB circuit design for EMI and EMC characteristics.
Software & Programming
116 ₪
/ hr
.NET, C#, Dot Net, VB
ı use c#
C, C++
I developed this project in one of the offline UPS. I used dspic33fj64gs606 I developed in UPS. Again ups in buck / boost and I have developed full-bridge inverter topologies.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
I also provides control by making PMG engine processor.
SNMP AGENT did work.
I made a digital audio transmission using i2c with external clipboard.
A / D and I developed applications through the DAC.
I can use the AT command set.
I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM.
I perform vehicle tracking and M2M applications.
I'm experienced embedded software design with 16/32 bit processors in the C language application development.
I use Microchip's 8-bit,16-bit (DSPic), STM32 series processors.
Wireless and wired communications ((I2C, UART, USB, SPI), (Modbus, Ethernet, Wi-Fi, BLA, GSM, GPS, GPRS, RF)) and knowledge of the hardware and software design issues I'm experienced. I made electric vehicle production feasibility study.
I also provides control by making PMG engine processor.
Mobile App Development
EMPLOYMENT HISTORY
January
2005
-
Today
Electronic R&D
EREM Teknoloji
January
2000
-
2005
IBM TURK
6 SKILLS
87 ₪
/ hr