Why we need to use NMS for 4G SIM Card Router?

Imagine that there are hundreds of or thousands of 4G SIM Card Routers running at the same time, and how we manage these routers at the same time? If we operate one unit by one unit, then it will cost us so much time to finish the whole manage job. Then we require a system which support manage these routers in bulk at the same time, which is convenient and can save huge time for us.

We often call this system as “NMS”(Network Management System) or RMS(Remote Management System). An NMS is a system designed for monitoring, maintaining, and optimizing a network. It includes both hardware and software, but most often an NMS refers to the software used to manage a network. E-Lins Technology also launched its own NMS for management all series of SIM card router, moreover which is free for all formal customers who purchased E-Lins SIM Based Routers.

Network management systems provide multiple services. These include, but are not limited to:

1. Network monitoring - NMS software monitors network hardware to ensure all devices are operating correctly and are not near or at full capacity. Alerts can be sent to network administrators if a problem is detected.
2. Device detection - When a new device is connected to the network, the NMS detects it so that it can be recognized, configured, and added to the network. This is also called device provisioning.
3. Performance analysis - An NMS can gauge the current and historical performance of a network. This includes the overall performance of the network as well as individual devices and connections. For example, the NMS may detect aspects of a network where throughput is nearing the maximum bandwidth available. The data can be used to optimize the flow of traffic and recommend the addition of new hardware if needed.
4. Fault management - If a device or section of a network fails, an NMS may be able to automatically reroute traffic to limit downtime. This action may be performed on the fly or may be accomplished using a set of preconfigured rules. When a fault occurs, a network alert or notification is usually sent to one or more network administrators.

Of course different NMS have some different features. You can add or edit the features of NMS according to various kinds of requirements from clients

In the end, welcome to choose E-Lins NMS based M2M routers.

For more details, please visit https://www.e-lins.com/EN/